JHSXLS-II

JHSXLS-II克特自动复位双向拉绳开关

简介：

● 双向拉绳开关是当皮带输送机发生事故时，能够紧急停止输送机的保护装置

● 双向拉绳开关安装在皮带输送机两侧，用钢丝缆沿着输送机两侧把开关连接在一起，两开关间隔离不应超过40米（有坡度时应缩短

为25米）当皮带输送机出现紧急状况在任意位置都可紧急停止输送机

● 使用双向拉绳开关可防止昂贵的输送带受损害以防止进一步的工矿事故和人生伤害

● 双向拉绳开关在安全运行输送系统里是不可缺少的保护装置，其广泛应用于钢铁厂、火力发电厂、水泥厂、化工厂、港口等等

JHSXLS-II克特自动复位双向拉绳开关

■ 应用范围

● 常规皮带输送机，包括平皮带输送机和槽形皮带输送机

● 地下、索道支撑皮带输送机

● 轮船装卸系统、堆取料输送机

■ JHSXLS-II克特自动复位双向拉绳开关产品特点

● 坚固的铸铝外壳、静电防腐涂装适应于恶劣工矿环境安装

● 在恶劣环境也可使用

● 使用高性能的微动开关和无需要维护的铜管技术，耐久性卓越

● 可生产自动复位型产品

■ JHSXLS-II克特自动复位双向拉绳开关技术规格

● 接点容量： 1个SPDT 400VAC 10A

● 动作角度： 20°

● 动作张力： 49±10N (5±1kgf)

● 环境温度： -20℃～+80℃

JHSXLS-II克特自动复位双向拉绳开关产品技术参数

产品品牌：克特

产品名称：双向拉绳开关

产品型号：JHSXLS-II

工作电压：24V  220V      380V

触点个数：2个

触点容量：1-15A，可选

JHSXLS-II自动复位双向拉绳开关

JHSXLS-II KTGEE Automatic Reset Bidirectional Rope Pull Switch

Introduction:

The bidirectional rope switch is a protective device that can emergency stop the conveyor in the event of an accident

The bidirectional rope switch is installed on both sides of the belt conveyor, and the switch is connected together along both sides of the conveyor with a steel wire cable. The isolation between the two switches should not exceed 40 meters (shortened when there is a slope)

When the belt conveyor encounters an emergency situation (25 meters), the conveyor can be stopped at any position in an emergency

The use of a bidirectional rope switch can prevent damage to expensive conveyor belts and prevent further industrial accidents and personal injury

The bidirectional rope switch is an indispensable protective device in the safe operation of conveying systems, and it is widely used in steel plants, thermal power plants, cement plants, chemical plants, ports, and so on