CL12-3005PA

【品牌】：克特

【产品名称】：转速传感器

【规格型号】：CM12-3005PA

【外型尺寸】：圆柱直径12mm（毫米）

【检测频率】：1Hz-10000Hz

【检速范围】：1-20000（转/分钟）(与合适齿轮配套）

【感应材质】：铁

【检测距离】：5mm（毫米）

【工作电压】：DC6-24V

【输出形式】：直流PNP

【产品特点】：输出稳定方波，抗抖动能力强，适用于各种场所的速度检测；全密封设计，防水防油防尘，稳定性高，抗干扰能力强

◆概述：

克特齿轮测速传感器采用电磁感应原理来达到测速目的，具有输出信号大，不需要放大，抗干扰性能好，可在烟雾、油气、水汽等恶劣环境中使用等特点，可替代其他相关齿轮传感器，广泛用于国防化工，纺织机械领域。

◆产品特点：

CL12-3005PA克特齿轮测速传感器输出稳定方波、抗抖动能力强适用于各种场所的速度检测。

 全密封设计，防水防油防尘；其优点是温度范围宽，热稳定性高，抗干扰能力强。

◆产品安装：

1.安装时用CL12-3005PA克特齿轮测速传感器自带的螺母固定在安装孔上，固定装置建议采用非导磁材料（铜、不锈钢等），传感器应正对齿面安装，齿面和传感器前端面的间距不应大于额定检测距离。

2.检测距离与配套使用的检测齿轮的模数相关，模数越大可以有效检测的距离越长。

NPN four wire switch output ◆ Product features:

The CL12-3005PA Kete gear speed sensor outputs stable square waves and has strong anti vibration ability, which is suitable for speed detection in various places.

Fully sealed design, waterproof, oil proof, and dustproof; Its advantages are wide temperature range, high thermal stability, and strong anti-interference ability.

◆ Product installation:

1. During installation, fix the CL12-3005PA gear speed sensor with its own nut on the installation hole. It is recommended to use non magnetic materials (copper, stainless steel, etc.) for the fixing device. The sensor should be installed facing the tooth surface, and the distance between the tooth surface and the front end face of the sensor should not exceed the rated detection distance.

2. The detection distance is related to the modulus of the matching detection gear, and the larger the modulus, the longer the effective detection distance.